Please note all of our meters are now sent either E-Parcel or registered mail at no extra charge (you may need to sign for it), due to the high volume sent we do not load the tracking number, but it is available if required, if you do not want the meter sent registered please advise us.
These are not for Lifepo Batteries see our other ads for an alternative for lifepo batteries.
Suits AGM, Flooded and sealed batteries
Enclosed not open like the cheap copies, there is many of these that look the same, chances are if its cheap its exactly that, we use these meters ourselves and have tested extensively, unfortunatley there is many copies made by many "factories" and you dont always get what you pay for.
Just because they look the same does not mean they are, many are sold and freight forwarded, we stock these and you are welcome to arrange a pickup.
Ideal for 12 volt lead acid batteries, normal and deep cycle and AGM.
Quick Instructions: You will need to check the meter is set for your battery type.
Hook the battery up in your system leaving the neutral wire disconnected initially.
Hold the left button and touch the neutral wires together to turn the meter on, it will flash with: L01, or P01, of F01. For 12 volt Battery including AGM
Press the left button until it displays P01 If you have 24 - 48 V also press the right button and set to 02 (12 x 2 = 24), 48V 04( 12 x 4 = 48) etc.
For lithium strings set to L and as above set the string to the correct number.
For lithium Ion Phosphate set to F, and the correct number of strings.
Once you have set disconnect the earth wire and finish the install, when you reconnect the wire permanently your meter will be set.
- 100% brand new and high quality
- Longer service life
- Push switch button
- Dual IC integrated circuit control, more stable
- The product is suitable for lead-acid 12V, 24V, 36V, 48V (8-70V)
- The product is suitable for 3.7V lithium series multi-platform, 2 string, 3 string, 4 string, 5 string, 6 string, 7 string and 8 string 9 string 10 string 11 string 12 string 13 string 14 string 15 string
- S1:%/V Rotate display in 2s
- Power percentage and voltage are displayed in turn recurrently and automatically;
- S2:Inactivity sleep in 10s
- Automatically sleep after battery capacity display for 10 s, save power, press the function key to wake up power display for 10 seconds;
- S3:Turn on backlight
- Power display turns on or off power backlight;
- S4:Show logo(Applicable to small battery icon)
- Logo icon is located in the underface of battery symbol on the left side of LCD, turn on and show the logo;
- S5:Discharge mode selection
- Power displays two kinds of battery discharge curve, different environments convert to select appropriate battery discharge modes;
- Voltage Range: 8-70V
- Material: Plastic
- Dimension: app.61.3mmx33.3mmx13.5mm/2.41''x1.31''x0.53''
- Cable length: app.30cm/11.81''
- Housing color: Black
- Quantity: 1 Set
- Note: 1.Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.
- Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
- 1 x Battery Capacity & Volt Tester
- 1 x Cable